3-2 Add Existing Area : Block designation outside the drawing is required. (Name can be loaded)

Do you want to add existing usage drawings?

 You can also add existing drawings to the drawing area of ​​'MechClick'. Batch output function and management become easy. To add an existing drawing, the outline of the drawing must be designated as a block, and the lower left should be designated as the insertion point.

* Command: MCLBS Helps to create fast blocks. [Select object, specify insertion point]

A. How to set the contour block in the drawing area

 Specify the block with MCLBS. The insertion point must be in [0, 0] of the area.

Drawing paper sizes are based on the insertion point, so if the insertion point is misaligned, it can not be inserted properly.

B. Add existing FORM usage

In the drawing area, click the 'Add existing FORM usage' button and select the outline to add as a block

1) If you set the block size to paper size, it will be recognized as SCALE automatically, but if it is non-standard, you have to specify the size. [Refer to 'C']

2) You can manually create a drawing number, but you can also import it by name. 

C. Automatic SCALE Recognition Condition

 If you specify a drawing area that is a paper size as a block, the scale will be recognized automatically regardless of which scale you specify later.

* When recognized automatically: When the drawing area applied as the paper size is set as a block